Passive antenna systems
Advantages: | Disadvantages: |
· Supports Analogue and Digital VHF / UHF radios | · Antennas max 50m apart (UHF) 100m (VHF) |
· Low-cost hardware | · Can only link 2 or 3 blackspot areas together |
· Relays all simplex channels | · Antennas and cables need installing |
· Can be installed in intrinsically safe areas |
|
Linked Gateways (P1 / SIP)
Advantages: | Disadvantages: |
· Supports Analogue and Digital VHF / UHF radios | · Will only work where there is no overlap of coverage e.g. just between Bridge and Engine room. |
· No limitation on distance between Gateways | · Requires Server so overall cost compared to a repeater system to be considered |
· No limitation on the number of Gateways (as long as no overlap of coverage) | · Will require separate channel to one used in other areas and needs portable radio operator to manually change channel. |
· Connects to existing WiFi or Ethernet networks (low installation complexity / cost) | · Cannot be installed in intrinsically safe areas |
· Provides a single channel per Gateway set |
|
UHF Repeaters
Advantages: | Disadvantages: |
· Supports Analogue and Digital VHF / UHF radios | · Requires antenna / leaky feeder installation (moderate / high complexity / cost) |
· No distance limitation on location of repeater(s) | · Provides a single channel per Repeater (Analogue) or two channels (DMR slot 1 & 2) |
· IP roaming supported by some repeaters | · IP roaming requires more channels |
· Intrinsically safe and |
WiFi Radios
Advantages:
Disadvantages:
· Supports SIP WiFi radios
non- |
IS |
· Uses existing WiFi infrastructure (no repeaters or antennas to install)
versions |
available |
· Works wherever there is WiFi coverage
· Only requires a low-cost server attaching to the network (over WiFi or Ethernet)
· A single server supports multiple channels
|