Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

The user re-applies the preferred network setting
OR
The radio is switched off and on again (or the battery changed)

How to set:

  1. Press the ‘Menu’ button (right hand button under the display)

  2. Using the navigation button Scroll to and select ‘Settings’
    Enter ‘Settings’ by pressing the middle button under the display

  3. Select ‘Cellular’ by pressing the middle button under the display

  4. Using the navigation button Scroll to and select ‘Scan networks’

  5. When asked to continue press the right hand button under the display

  6. The ‘Scanning’ icon will rotate, once complete it will change to a ‘tick’

  7. Now scroll to and select ‘Operators’

  8. You will now see a list of all the operators in your area. You can only use ones supported by your SIM card.

SIM cards supplied by Entel

...

Wireless Logic SIM Card:

  • O2

  • Vodafone

  • EE

  • Three

As of October 2020, most new DN radios fitted with an Entel SIM will be Wireless Logic SIM’s

Wireless Logic SIM cards were supplied from October 2020 Scroll to your preferred operator and press the middle button under the display to set.

The radio will now return to the home screen.

You can check the connected network and its signal strength by quickly double pressing the ‘Dot’ button to the right of the radios display. This button gives the information as detailed in the table below:

 

1 quick press

Press twice (fast)

Press 3 times (fast)

1st Line

Radio FW version

Cellular signal in dBm (lower = better)

 

2nd line

Radio serial number

SIM profile name

Server error information

3rd line

Radio User Name

Cellular Network name & Band no.

 

4th line

Radio Server and port number

WiFi signal level in dBm (lower = better)

 

5th line

 

WiFi Connection state