How it works:
By setting a preferred network (operator) the radio will stay on that network until the signal is too weak.
When the signal on the preferred network is too weak the radio will automatically scan for other available networks.
Once an available network is found the radio will connect to this network and will stay on this network until the signal becomes too weak when it will start scanning for any available network again and then connect to one if a suitable one is available.
Please note, once a new network has been automatically selected and connected to, the radio will not return to the preferred network setting until either:
The user re-applies the preferred network setting
OR
The radio is switched off and on again (or the battery changed)
How to set:
Press the ‘Menu’ button (right hand button under the display)
Using the navigation button Scroll to and select ‘Settings’
Enter ‘Settings’ by pressing the middle button under the displaySelect ‘Cellular’ by pressing the middle button under the display
Using the navigation button Scroll to and select ‘Scan networks’
When asked to continue press the right hand button under the display
The ‘Scanning’ icon will rotate, once complete it will change to a ‘tick’
Now scroll to and select ‘Operators’
You will now see a list of all the operators in your area. You can only use ones supported by your SIM card.
SIM cards supplied by Entel
Telenor SIM Card:
O2
Vodafone
Telenor SIM cards were supplied from 2019 to October 2020
Wireless Logic SIM Card:
O2
Vodafone
EE
Three
Wireless Logic SIM cards were supplied from October 2020 to March 2021
Globalgig SIM Card:
Three
Vodafone
O2
As of March 2021, most new DN radios fitted with an Entel SIM will be Globalgig SIM’s
Scroll to your preferred operator and press the middle button under the display to set.
The radio will now return to the home screen.
You can check the connected network and its signal strength by quickly double pressing the ‘Dot’ button to the right of the radios display.