On the DN495 radio, goto settings/wifi and make sure wifi is enabled.
Then, select WIFI/ADVANCED SETUP. You will see this screen:
Now, Using your smartphone or tablet – go to the WiFi network settings and connect to the DN WiFi hotspot. (there is no password)
When connected, your web browser will automatically launch with the page shown below if using an IOS device, or with Android, click on the ‘tap here to sign into network’ link. (for older Android devices open your web browser and type ‘192.168.43.1’ into the address bar and go to this address)
Click 1. WiFi setup and you will now be presented with the following page:
Starting with SSID, click in the white box and a dropdown listing all the local networks will appear.
Select from one of these or click ‘New’ and enter the SSID manually.
Then select the Security Type, and finally enter the password for the WiFi network.
Click ‘Apply’. (this will return you to the previous menu)
Finally, click ‘DONE’ at the bottom of the menu.
The DN radio will restart and connect with the credentials just entered.
NOTES:
WPA Enterprise authentication is configured using name and password only, certificates are not supported currently.