/
How to program Roaming

How to program Roaming

Owned by Steve Mulka
Oct 25, 2024
2 min read

Please note:

  • FW minimum requirement: 2.3.21

  • Programmer (EDP) minimum requirement: 1.0.3.62

  • A license is required to activate the Roaming feature

Create your Roaming List

  1. From the programmer, go to menu Pool > Roaming Pool

  2. Click Add Roaming and click Go to Zone pool.

Allocate a Roaming List to the Zone

  1. Go to menu Pool > Zones

  2. At Roaming tab, select the desired Roaming List and click Add. The selected Roaming List should move to the right section (“Allocated to this zone”)

Add RF channels as member of Roaming list.

  1. Go to menu Pool > Roaming Pool

  2. Select the desired RF Channel and click Add. The selected channel should move to the right section (“RF channels used by roaming”)

Add a Roaming list to channel preset

  1. Go to Channel Preset Data on each radio configuration.

  1. Double click and select the Roaming List

 

Related content