/
How to Add a button to DX/DT radio

How to Add a button to DX/DT radio

  1. Connect radio to programming software

  2. Read configuration

  3. double click radio under general info & settings

  4. go to button layout tab

  5. select which button you wish to add which feature you require (on either long or short press)

  6. go to utilities menu at the top of the programmer

  7. click programming window

  8. using the drop down select the radio and write configuration

Related content

How to change zones on display DX/DT model
How to change zones on display DX/DT model
More like this
Updating DX & DT firmware using End User Programmer (EUP)
Updating DX & DT firmware using End User Programmer (EUP)
More like this
Adding Sub-tones (CTCSS / DCS - PL / DPL) to DX & DT radios using Entel Dealer Programmer (EDP)
Adding Sub-tones (CTCSS / DCS - PL / DPL) to DX & DT radios using Entel Dealer Programmer (EDP)
More like this
DX DT: Memory Scan Quick Guide (Display Models Only)
DX DT: Memory Scan Quick Guide (Display Models Only)
More like this
DX DT: DMR FAQ
DX DT: DMR FAQ
More like this
Adding Sub-tones (CTCSS / DCS - PL / DPL) to HT radios using Entel Programmer
Adding Sub-tones (CTCSS / DCS - PL / DPL) to HT radios using Entel Programmer
More like this