Entel Support Desk

All content
Space settings

How-to articles
How-to articles
This trigger is hidden
Troubleshooting articles
Troubleshooting articles
This trigger is hidden

Results will update as you type.

•
DN: Basic User Guide
DN: Dealer Portal Radio Options.
•
DN: Entel Dealer Portal (E-PoC Service Management Portal)
•
DN: Connecting Bluetooth Headsets
•
DN: VPN Server
•
DN: Moving Radios between Servers
•
DN: Blocked Clients List (BCL)
•
DN: Self Test (including Man Down Sensor)
•
DN: DN495 is ‘Disconnected’ – check list
•
DN:User Settings
•
DN: WiFi connection – check list
•
DN: DN495/425 WiFi Configuration.
•
DN: DN495 cellular connection – check list
•
DN: Tassta Users
•
DN: Manual PoC Server Configuration
•
Network Port requirements for Gateways, DN radios and Smartphones
•
DN: Emergency Send without Receive
•
DN: APK Store
•
DN: Connecting Bluetooth Low Energy (Nextav) PTT button
•
Universal gateway external cabling
•
DN: DN495/425 APN setup
•
DN: Setting a preferred cellular network operator
•
DX DT: Memory Scan Quick Guide (Display Models Only)
•
How-to articles
•
DN: Dealer Portal for Non-Entel Servers
•
Entel PoC architecture
•
Gateway: Setting APK for non-Entel servers
•
Automatically starting virtualised P1 servers
•
Troubleshooting articles
•
Cannot manage my server
•
Restrict Access to P1 web configuration
•
Install P1 or E-PoC Dispatcher on AWS Instance
•
DX DT: DMR Software Manual Update
•
DX DT: DMR FAQ
•
DN: Cellular signal levels (RSSI) explained
•
DX DT DN: Battery care
•
1.1.2024 ITU RR18 requirements regards to channel table for maritime VHF ( incl 4 digit channel numbers.)
•
DT radio no receive audio issue
•
DX radio going to sleep / re-starting
•
DX5 radio shutting down on PTT
•
DX / DN Series radio PTT surround cracking
•
DX radio reboots when a tone is played while audio accessory PTT is pressed
•
DX / DT Critical Error (solid or constantly flashing red LED)
•
DT Battery dead
•
Sanitising DX, DN, DT, HX & HT radios
•
Passive antenna systems
•
HT649 cannot be programmed with the new 4-digit VHF Marine channels
•
Programming Predefined Text Messaging
•
Extending range of on-vessel UHF communications
•
Battery Validation - Known issues
•
Batteries not validating when hot or cold
•
DT Intermittent receive issue even with a strong signal
•
DN WPA-Enterprise WiFi with client certificates
•
Cannot cancel incoming emergency call on non-display radios
•
Maritime UHF frequencies for Vessels operating in international waters
•
HT655 & HT644KR removal of channels 24, 25, 26, 27, 28, 37, 84, 85 & 86
•
Can I leave the accessory cover off my DT or DX intrinsically safe (I.S.) radio?
•
DX & DT Emergency revert channel programming guide
•
DX & DT VHF Marine models - Selecting USA, CAN & INT channel lists
•
Adding private channels to DT & DX VHF marine x44 models
•
ENTEL UK FIRST TIME PROGRAMMING GUIDE - DX/DT
•
Gateway 3.0 Programming Configuration and User Guide
•
How to unlock keypad HT644
•
How To change Modes INT CAN USA on a HT644
•
HT644 Programming Guide
•
PoC Issue log sheet
•
Installing CP210x USB driver for Entel Digital and End User Programmers
•
Setting VOX on HT644
•
Text messaging DMR models
•
DT / DX PRC error 7
•
Poor communication quality DX or DT radios
•
Where to download Dealer programming Software
•
Service Manual Requests, Spare Parts and Repairs
•
PoC: Emergency Calls (How it works)
•
CNB450E-IS won't charge
•
HT FI Loading Error
•
Adjusting HT Squelch Level
•
IP Roaming: Guide for adding roaming lists
•
DN: Updating Firmware over a WiFi hotspot
•
DT Radio volume
•
Add/Remove Model on Entel Programmer v3.2.0.0 / v3.2.0.2
•
HT Radio stuck in upgrade mode
•
Overheated battery
•
Entel Digital Dealer Programmer Guide
•
PoC: Connection issues troubleshooting & log sheet including dot/info button functions.
•
Entel battery fails to authenticate
•
Radio displays error trap message
•
Configure P1 Server for off-grid operation
•
P1: Intermittent voice audio when using cellular.
•
How to change zones on display DX/DT model
•
Enabling PTT talk permit tone
•
Cannot overwrite the file (Entel programmer V3.2.0.0 + V3.2.0.2
•
P1: Server: System Logs
•
Cannot see / access Talk Permit Tone in Entel Programmer
•
HT644 A/B instant access not working
•
How to Add a button to DX/DT radio
•
P1 Hardware & Network Requirements
•
E-PoC Disaster Recovery Plan
•
Cannot add models (.dll's) in HX & HT programmer
•
How to check DX, DT & DN firmware version
•
Updating Entel Digital Programmer
•
Updating DX & DT firmware using End User Programmer (EUP)
•
DN: Disconnected after changing password
•
How to program P channels in HT5/8/944
•
Cannot program HT783E
•
How to program Roaming
•
How to program Encryption
•
Programming the Start-Up Logo
•
Copying programming data from one DX or DT radio to another using Entel Digital Programmer
•
How to identify a faulty radio or accessory
•
What protection against corrosion from salt water does the DT radio have?
•
Adding ".dll" file to the Programmer
•
P1 Server won't reboot after power cut
•
New style speaker microphones do not work on non-display DX Land and Marine models
•
Adding Sub-tones (CTCSS / DCS - PL / DPL) to DX & DT radios using Entel Dealer Programmer (EDP)
•
HT644 Weather (WX) Channels
•
What range will I get from my Entel hand held radios?
•
DN: Default Group - Cold Boot /Warm Boot
•
DN: Default Group - Cold Boot/Warm Boot
•
Loading .eeu file using End User Programmer (EUP)

Entel Support Desk

/

Gateway 3.0 Programming Configuration and User Guide

Gateway 3.0 Programming Configuration and User Guide

Owned by Steve Mulka

Last updated: Jun 14, 2024

1 min read

Loading data...

{"serverDuration": 12, "requestCorrelationId": "8f66c06aad384ef39ec76bfef5ac4959"}