/
Enabling PTT talk permit tone

Enabling PTT talk permit tone

To enable the talk permit tone follow steps below

  1. create a fleet file or read a radio data

  2. for each radio double click and go to General information and settings

  3. on the right hand side you will see Tone settings - PTT tone “Talk Permit Tone Enabled: “Off”

  4. change this to yes

  5. write configuration to radio.

 

Related content

Cannot see / access Talk Permit Tone in Entel Programmer
Cannot see / access Talk Permit Tone in Entel Programmer
More like this
DN: Dealer Portal Radio Options.
DN: Dealer Portal Radio Options.
More like this
DN: Basic User Guide
DN: Basic User Guide
More like this