HT Radio stuck in upgrade mode

How to remove HT radio from upgrade mode

Open

1. Open the Entel Programming software

2. Open the Enel Flashwriter

Open

3. Click on the … and select the correct source file (this will be the model you are trying to reflash)

4. Click Program and allow green bar to complete the process

5. Turn radio off

6. Place radio into programming mode (press and hold lower side button and power on)

7. Read radios data

8. Write data back to radio

9. Test Radio

NOTE: If you require the programming software please contact Entel direct or the Dealer who supplied the radios.